Design Engineering, Inc. 10908 Versa Shield 7in x 24in

Description

One 7 inch by 24 inch Versa Shied. Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield.

• Withstands 500 Degrees F Of Direct Heat/2000 Degrees Radiant
• Edges Attach To Itself With Hook And Loop Closure Design
• Universal-Trim Length To Size
• Can Easily Be Removed For Shows
• No Need To Remove Starter For Installation In Most Cases
• Protect Master Cylinders/Cool Cans/Distributor /Fuel Pumps
• 7 in. Wide x 24 in. Long

Information:

Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield.